Description:
A keyboard that conveys the soul of the pianist
Young Chang keyboards are made of spruce and weighted and balanced giving the pianist a more responsive touch.
Piano Hammers
Hammers conveying the dynamic expression of the pianist
Hammers are adjusted to strike the strings in less than 1/250 of a second. Hammers are made of maple, walnut and mahogany with Royal George felt and platinum blue or red full underfelt. Hammers are cold pressed to maximize tonal quality and longer life.
Piano Frames
Frames cast through the V-Process construction method
According to acoustic theory, piano frames must bear up to 20 tons of string tension. The frame, which also plays a crucial role in the alignment of strings. is produced through the ‘V’ Process. an electrical vacuum-casting method. in the Young Chang foundry.
Rounded cutoff bars
Rounded cutoff bars
Round cut off bars on lower section of soundboard prevents sound diffusion and optimizes the resonance of the soundboard.
Piano Pin blocks
Pin blocks made of 17-layer laminated panel to raise bearing power
The continuity of tone is emphasized when a piano is located in a concert hall or school auditorium. To ensure the bearing stress of tuning pins and maintain tuning stability, Young Chang pin blocks are made of I 7—layer hard maple laminated panel with layers glued at right angles.
Precise action
Agraffes desined to sustain better tone in Bass Section
Bass agreaffes in the bass section allow for more uniform tone and perfect string allignment thus allowing the pianist to be more
A keyboard that conveys the soul of the pianist
Young Chang keyboards are made of spruce and weighted and balanced giving the pianist a more responsive touch.
Piano Hammers
Hammers conveying the dynamic expression of the pianist
Hammers are adjusted to strike the strings in less than 1/250 of a second. Hammers are made of maple, walnut and mahogany with Royal George felt and platinum blue or red full underfelt. Hammers are cold pressed to maximize tonal quality and longer life.
Piano Frames
Frames cast through the V-Process construction method
According to acoustic theory, piano frames must bear up to 20 tons of string tension. The frame, which also plays a crucial role in the alignment of strings. is produced through the ‘V’ Process. an electrical vacuum-casting method. in the Young Chang foundry.
Rounded cutoff bars
Rounded cutoff bars
Round cut off bars on lower section of soundboard prevents sound diffusion and optimizes the resonance of the soundboard.
Piano Pin blocks
Pin blocks made of 17-layer laminated panel to raise bearing power
The continuity of tone is emphasized when a piano is located in a concert hall or school auditorium. To ensure the bearing stress of tuning pins and maintain tuning stability, Young Chang pin blocks are made of I 7—layer hard maple laminated panel with layers glued at right angles.
Precise action
Agraffes desined to sustain better tone in Bass Section
Bass agreaffes in the bass section allow for more uniform tone and perfect string allignment thus allowing the pianist to be more
